Tray 5 calibrations
●
Separator force
●
Stack height
●
Pick force
Separator force
HINWEIS:
rollers.
Setting the correct separator force is determined by passing the following tests:
●
Media separation test
●
Initialization check
Media separation test
1.
Open the Tray 5 top door, and then tape down the arm lifter link (callout 1) and the Tray 5 Media
Door Open sensor (SN107) (callout 2).
DEWW
Perform a separation force adjustment only on new upper (feed) and lower separation
Tray 5 calibrations 155