HP CM8060 Color MFP Kundendienst Handbuch Seite 161

Clean and lubricate media eject linkage bushings (5 minutes)
▲ Apply lubricant to the linkage (callouts 1-4). Use the yellow lubricant provided in the standard trunk
kit (Lubricant – Grease PAO Light, P/N 6060-1412). To correctly lubricate one specific bushing
(callout 4), first remove the bushing by unfastening its retaining screw.
Carriage encoder strip
Replace the carriage encoder strip at the scheduled preventive maintenance interval.
„Schlittenkodiererstreifen" auf Seite 540
Reset the preventive maintenance counter for this item every time maintenance is performed.
Carriage drive belt
Replace the carriage drive belt at the scheduled preventive maintenance interval.
„Schlittenantriebsriemen" auf Seite 543
Reset the preventive maintenance counter for this item every time maintenance is performed.
Accumulator wheel shaft assembly
Replace the accumulator roller at the scheduled preventive maintenance interval.
„Akkumulatorradwelleneinheit" auf Seite 879
Reset the preventive maintenance counter for this item every time maintenance is performed.
Tray 1 pick roller and pad
Replace the Tray 1 pick roller (on the Tray 1 pick shaft) and Tray 1 pick pad at the scheduled preventive
maintenance interval.
„Einzugswalze und Trennvorrichtung des Fachs 1" auf Seite 359
Reset the preventive maintenance counter for this item every time maintenance is performed.
DEWW Hardware maintenance 95