HP CM8060 Color MFP Kundendienst Handbuch Seite 190

Retrofit tag installation, placement, and orientation
Retrofit tag labels will be installed on the device and accessories at the factory in predetermined
locations. Retrofit labels will be positioned in a readable orientation with the label box marked "1" in the
upper left-hand corner.
ADF retrofit tag location
Raise the ADF. The retrofit tag label is on the ADF frame, near the left hinge.
Abbildung 4-3
Scanner retrofit tag location
Open the Tray 1. Remove one screw (callout 1) and then remove the plastic shield (callout 2). The retrofit
tag is on the scanner frame.
Abbildung 4-4
1
124 Kapitel 4 Managing and maintenance
Retrofit tag label locations (1 of 7)
Retrofit tag label locations (2 of 7)
2
DEWW