View all diagnostic trends
The Diagnostic Trends screen displays the following information:
●
Code: Error or warning code
●
Timestamp: Time that the event was reported
●
Subsystem: Specific subsystem affected by the event
●
Trend: The trend category
By default, all trends are listed when accessing the Diagnostic Trends screen.
View diagnostic category trends
The Diagnostic Trends screen can be filtered for specific primary event types. Available event categories
are:
●
Carriage Inaccuracy
●
Power Electronics
●
Paper Jams
To view primary diagnostic category trends:
1.
Click View Diagnostic Trends from the Event Log.
2.
Click an event category in the Diagnostic Trends box.
The list is updated to show only events for the category selected.
View diagnostic trend graphs
To view trend graphs:
1.
Click View Diagnostic Trends from the Event Log.
2.
Click an event category in the Diagnostic Trends box.
3.
Click View Graph/Change Interval in the Trend Time Interval box.
HINWEIS:
Use the subsystems menu
Use the subsystems menu to view diagnostic pages for specific subsystems of the MFP.
Understand the subsystems diagnostic pages
The subsystems diagnostic pages are categorized by functional system, such as dryer, vacuum, and
scanner. Use the pages to directly access status information for subsystem components.
To access the subsystems diagnostic pages:
▲
Click Subsystems, and then click the button for the subsystem that you want to diagnose.
ACHTUNG:
DEWW
Two different graphs are available.
If CDFT crashes during a test on a component, power cycle the MFP.
Troubleshoot the MFP and accessories
51