HP CM8060 Color MFP Kundendienst Handbuch Seite 165

Scanner exposure lamp
Replace the scanner exposure lamp when it is determined to be the source of reduced image quality
(for example, the lamp is burned out or is dimming).
ACHTUNG:
„Scanneraufnahmelampe" auf Seite 281
Reset the preventive maintenance counter for this item every time maintenance is performed.
Web wipe
Replace the web at the scheduled preventive maintenance interval.
HINWEIS:
and consumables" auf Seite
ACHTUNG:
„Reinigungsfilz-Patrone" auf Seite 673
Enter Protected Service Mode (PSM), and then select Initialize New Web on the web wipe tool form in
CDFT for this item every time the web wipe material is replaced.
HINWEIS:
HINWEIS:
enabled for that device, the device will show as "offline" from the driver and no print jobs can be sent to
it. As a workaround, disable SNMP Status Enabled.
In the Printers and Faxes folder, go to File, then Server Properties, click the Ports tab, select the port
that was set up for that device, and then click Configure. Uncheck "SNMP Status Enabled", and then
click OK.
DEWW
Do not touch the scanner lamp glass. Hold the lamp by the holders at the ends.
Dispose of all wet material as appropriate. See
26.
Use gloves and safety glasses when handling ink parts.
To complete the web initialization process, power cycle the system.
If the error code "C4.0204 - Device due for maintenance" has occurred with SNMP status
„Handling and disposing of service parts
Hardware maintenance 99