HP CM8060 Color MFP Kundendienst Handbuch Seite 172

Follow these steps to reinitialize NVRAM:
1. Enter the Startup Menu, and then sign in to the Startup Menu. For help, see
Menu" auf Seite
2. Select Service Tools and then sign in with the service password.
3. Select Reinitialize NVRAM.
For more information about NVRAM, see
Boot Manager
Boot Manager can be used to troubleshoot formatter problems and should rarely be used. Boot Manager
is generally not recommended for use in the field.
1. Enter the Startup Menu, and then sign in to the Startup Menu. For help, see
Menu" auf Seite
2. Select Service Tools and then sign in with the service password.
3. Select Boot Manager.
4. Select the following options:
Option
Boot to Device
●
USB Port 0
●
USB Port 1
●
Pre Boot Installer
●
Formatter Firmware
Reset Boot Configuration
106 Kapitel 4 Managing and maintenance
101.
101.
„NVRAM initialization" auf Seite
Function
Select the device from which to power up the formatter. The
USB ports are concealed beneath a panel.
ACHTUNG: Selecting Formatter Firmware can cause
firmware incompatibility problems.
Select this option to restore a missing power up entry for an
eligible device from EFI NVRAM. After the entry is restored,
the formatter should be able to power up correctly.
„How to use the Startup
115.
„How to use the Startup
DEWW