Sartorius LMA316PA Betriebsanleitung Seite 88

WLM6009-a10081
Only the measured values are copied - not the reference values.
5. Press Close.The copy process is complete.
New
The Calibration properties dialog appears.
You create a new entry in the calibration table independently of the measured values. Every value
can be entered via this dialog.
1. Press an input field to display the Numerical input (Details on page 125) or Text input (Details
on page 124) dialog.
2. Press Apply to insert the entry into the table.
O Example: A value has been deleted by mistake and must be entered manually.
Values from another calibration are adopted to enable a comparison.
Table > Settings
The Settings dialog appears. You can modify the table of calibration results to suit your personal
needs.
See Settings for tables (Details on page 126).
Table > Print
Selected calibration values can be printed out.
See page 53 for information on how to connect a printer.
Select Measurement > Calibration >Table > Print.
The table is now displayed in print mode, i.e. controls (
are displayed at the bottom.
1. Press a row to select it.
O Note: You can select one or more rows.
2. Press the Print button.
The selected rows are printed out.
3. Press Close. The printing of the values is complete.
88
LMA316PA / LMA321PA - Operator Interface - Reference
page 70) for selecting one or more rows