Global Settings - Sartorius LMA316PA Betriebsanleitung

WLM6009-a10081

Global settings

This menu has the following sub-items:
– View (Details on page 108)
– Global settings (Details on page 108)
View
Numbers after the decimal point
You specify the number of decimal places to be displayed for the shown measured values (mois-
ture, density, and temperature) and for the shown measured calibration values.
1. Press a list field.
2. Press the number you require.
O Note: Regardless of what is actually displayed, all values are stored in the system with a consid-
erably higher level of accuracy.
Status line
Extended
1. Activate this option to define an extended status bar display.
2. Select Moisture and/or Density if you want these values to appear in the status line.
Font size
3. Specify the font site for status bar display.
Virtual keyboard
Option activated: Values and text can only be entered using the virtual screen keyboard.
Option deactivated: A simple input field is displayed instead of the virtual keyboard. Val-
ues and text are entered using the connected keyboard.
Full screen
This option can only be used if you have TMV on an external PC, since on touch screen devices
the TMV window is always adapted in line with the screen.
Option activated: The TMV window is automatically adapted in line with the screen.
Option deactivated: The TMV window is opened in the standard size or with the window
size last set by the user.
4. Finally, press on Apply. The settings take effect immediately.
Global settings
This dialog is for specifying various general settings. There are several tabs in the top part of the
dialog (MW device, Temperature, and Analog outputs). Press one of the tabs to open the page
in question.
If you have changed settings, then choose Submit to close the dialog and accept the changes.
In some cases, you have to restart TMV before the changes take effect.
108
LMA316PA / LMA321PA - Operator Interface - Reference