Sartorius LMA316PA Betriebsanleitung Seite 104

WLM6009-a10081
Delete
You can delete a product from the list. However, you cannot delete the predefined references
which are already configured when the device is delivered.
1. In the menu, select Product settings > Edit > Delete.
The table is now displayed in delete mode, i.e. the controls (
rows are displayed at the bottom.
2. Press a row. The product is selected.
3. Press Delete.
The product is deleted.
4. Press Close.
The deletion process is complete.
Copy
You can copy a product entry. Copied entries are inserted at the end of the table. Copying an
entry makes it easy to create similar entries.
1. In the menu, select Product settings > Edit > Copy.
The table is now displayed in copy mode, i.e. the controls (
rows are displayed at the bottom.
2. Press a row. The value is selected.
3. Press Copy.
Selected entries are copied and inserted into the table as new values.
4. Press Close.
The copy process is complete.
New
1. In the menu, select Product settings > Edit > Create.
The Product properties dialog appears.
2. Press an input field.
The Numerical input (Details on page 125) or Text input (Details on page 124) dialog appears.
3. Enter the following data:
General
No.
Enter a freely selected ID number for each product.
Cal.no.
If a separate calibration is carried out for the product, choose self here.
If the calibration of a similar product is referenced, select the ID number of the product in
question.
Name
Enter a product name which clearly identifies the product.
Remark
If required, enter a remark which might help you to identify the product later on.
Sensor mode
Select the sensor and the associated mode for measuring the product here. The device auto-
matically detects the sensor modes of most properly connected sensors.
104
LMA316PA / LMA321PA - Operator Interface - Reference
page 70) for selecting one or more
page 70) for selecting one or more