Sartorius LMA316PA Betriebsanleitung Seite 79

WLM6009-a10081
– Temp. (temperature)
– Off (no display, only available in the second panel)
auto
Press the box to automatically adjust the scale of the Y axis. All of the readings in the measure-
ment series are then shown.
The scale can be selected differently for two curves. The values for the first curve are shown on
the left - in the corresponding colour - and those for the second curve are shown on the right.
If auto is deactivated, use the input fields to select values for the required depiction.
Min / Max
Enter the lowest and highest values to be shown here.
1. Press the input field to display the Numerical input (Details on page 125) dialog.
Values outside this set range are excluded. If this is the case for several sequential values, the
curve may not appear at all.
The vertical scaling cannot be modified directly from the graph.
Line
The colour of the selected curve is displayed here. You cannot change this colour.
Moisture: Blue
Density: Yellow
Temperature: Green
Alarm
Here, you specify the range within which measured values are to be considered acceptable. The
selected range is displayed in the graph and in the analog display (
Measured values outside this range trigger an alarm that can be evaluated elsewhere (e.g. in
production control).
show
Press the box to display the corresponding range.
No alarm range is defined.
Min / Max
The values for the lower and upper limits of the alarm range are displayed here. These values
are defined in the product properties (
1. Press Apply. The graph is displayed in accordance with the selected settings.
Print
You can print the graphical depiction of the measured values.
See page 53 for information on how to connect a printer.
From the menu, select Measurement > Graph > Print.
The graph is printed as it appears on the screen.
LMA316PA / LMA321PA - Operator Interface - Reference
page 103).
page 68).
79