Using The Touchscreen (Only For Lma321Pa) - Sartorius LMA316PA Betriebsanleitung

WLM6009-a10081
Exception: If the LMA321PA is controlled via an external PC, the operating software running there
must be terminated by clicking on the Close symbol in the title bar. If you are logged on with
access rights of level 4 or higher, you can also close the software by choosing Service > Close.
5.6 Information about using the software
You control the TMV software in one of the following ways:
By pressing the controls on the touchscreen with your fingers,
Using a connected mouse and keyboard
Using the mouse and keyboard of a connected PC
See page 70 for an overview of on-screen controls.

Using the touchscreen (only for LMA321PA)

When you use the touch screen to operate the device, you simply press the controls on the
screen with your finger or with a special pen.
Caution:Never touch the screen with sharp objects such as screwdrivers or ballpoint pens.
These can damage the screen
You use input dialogs to enter letters and numbers (
To select a menu item or execute a command, press the relevant element.
O Note: The mouse cursor is always visible – even if no mouse is connected. The mouse cursor
moves to the position touched on the screen.
Operating the device using a mouse and keyboard
The device must be operated using a mouse and keyboard in the following cases:
LMA316PA: This device does not have an integrated touchscreen and must be operated using
a mouse and keyboard, since the externally connected monitor is not touch-sensitive.
LMA321PA: For administrative tasks or if the touchscreen is dirty, it might be useful to connect a
keyboard and mouse to the appropriately colour-coded sockets on the rear of the device.
External PC: If you are controlling the device using an external PC, you operate it using the key-
board and mouse of the PC in question. See Control via external PC (Details on page 17).
Deactivating the virtual keyboard
If you are not using the touchscreen to operate the device and are using a keyboard instead, you
can deactivate the virtual keyboard to make the device easier to control. As a result, a simple
input field is shown when you need to enter values or text (e.g. remarks) and you enter numbers
or letters directly using the connected keyboard.
1. Choose System settings > Global settings and open the Settings 2 tab.
2. Deactivate the Virtual keyboard option.
3. Restart the programme to activate the changes.
O Note: The instructions in this manual refer to operating the device with the touch screen. The only
difference is that you "press" a control or menu item on the touchscreen whereas you "click"
elements when using a mouse and keyboard.
LMA316PA / LMA321PA - Startup
page 124).
27