Sartorius LMA316PA Betriebsanleitung Seite 23

WLM6009-a10081
5. Startup
5.1 Instructions for setting up the system
The microwave cables can be up to 3 metres long (special design) but the standard cables are 1
metre long. The evaluation unit must therefore be fairly close to the sensor.
The rear device feet are for setting the LMA316PA / LMA321PA down during transport but not for
positioning the connected device, since this can damage the cables.
Place the LMA321PA into position and fold down the handle if the LMA321PA is to be positioned
on a slight slant to make it easier to use.
Touchscreen
Handle
If an external monitor is to be placed on the device, it cannot be positioned on a slant. Make sure
that it is easy to read the screen by tilting the monitor. If using an external monitor, you also
require an external mouse and keyboard.
O Note: Prior to moving the LMA316PA / LMA321PA, switch it off and remove all cables from the
rear of the device.
LMA316PA / LMA321PA
Cable
connections
23