Herunterladen Inhalt Inhalt Diese Seite drucken

Sartorius LMA316PA Betriebsanleitung Seite 14

Mikrowellen-feuchtemessgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

WLM6009-a10081
Brief description of the connections
MW-Gen, MW-Det
Connection of the microwave cable to the corresponding sensor connections. The measuring
data is transmitted over these links (Gen=Generator sends the microwaves to the sensor,
Det=Detector receives the microwave signals).
Attention:
The connections of both devices with the same name must always be connected to each other.
For easier assignment, both the MW Gen connections and the microwave cable used for this con-
nection are marked in green.
Sensor 1, 2
Optional linkage to the sensor for devices of the Black Line series. The sensors transfer the
configuration data as well as any temperature measurement data over this interface.
Temperature sensor (thermometer symbol)
It is possible to connect an additional PT 100 temperature sensor for determining the current
temperature values.
The PT 100 can either be used as an alternative to a temperature sensor integrated in the sensor,
or for sensors that do not possess a built-in temperature sensor.
Ethernet (network symbol)
The evaluation can be linked to the company network by means of a network cable. In this way
the evaluation device can be controlled using an external PC with a Windows version of the soft-
ware.
O
Note: The network settings (IP address, etc.) are specified in System settings > Configuration
> Communication > This TMV (access dependent on the respective user rights).
Operating procedures directly on the evaluation device take priority over commands entered via
the Windows version on the external PC.
Service interface (spanner symbol)
RS232 interface (for service purposes only): Connection to service laptop in cases of malfunction.
COM1
Passive message interface
Monitor
If an external monitor is used then it is to be connected via this connection to the evaluation
device. The use of an external monitor is necessary for devices without touch screens. In these
cases an external keyboard and a mouse must also be connected.
PS2 connections (keyboard, mouse)
Here the keyboard and/or the mouse can be connected for operating the software.
14
LMA316PA / LMA321PA - Product description

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Lma321pa

Inhaltsverzeichnis