Sartorius LMA316PA Betriebsanleitung Seite 47

WLM6009-a10081
12. The dialog for entering a remark is shown. You can enter the number of the sample here, for
example. Then press Apply.
13. The measured value is displayed. If the measured value is outside the set alarm limits, the bar is
displayed in red on the screen.
O Note: Even if several measurements are taken for a sample, only one line with the average value
of the measurements is shown.
8.2 Printing measured values
If a printer is connected via a USB port or network connection, you can print the graphical depic-
tion of the measured values or the table if required.
Printing a graph
1. Press Measurement > Graphics > Print.
The standard print dialog appears - you can specify the print settings and trigger printing by
clicking Print.
Printing a table
1. Press Measurement > Table > Print.
2. In the table, select the values you want to print or press All to print the entire table
3. Press Print.
The standard print dialog appears - you can specify the print settings and trigger printing by
clicking Print.
LMA316PA / LMA321PA - Taking measurements
47