Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WLM6009-a10081
Mode
The current process is displayed here.
– Measurement (Details on page 73)
– Calibration (Details on page 84).
In addition, the system displays information telling you whether the calibration is for moisture or
density.
Pressing the panel toggles the display screen between the table and graph view.
– Product settings (Details on page 103)
– Compression test (Details on page 119)
– Sensor modes (Details on page 110)
– MW devices (Details on page 112)
Product
Displays the product that is being measured or calibrated.
The selected moisture offset for the calibration is displayed to the right.
1. To select another product, press the display screen.
The Product choice (Details on page 73) dialog appears. The product selection screen can be
called up using the Measurement (Details on page 73) or Calibration (Details on page 84)
menu item.
2. Press on the moisture offset display to enter a different value for the moisture offset.
LMA316PA / LMA321PA - Operator Interface - Reference
69
Werbung
Inhaltsverzeichnis
