Sartorius LMA316PA Betriebsanleitung Seite 112

WLM6009-a10081
Settings
The Settings dialog appears. You can customize the depiction of the table for displaying the
product settings here.
See Settings for tables (Details on page 126).
Print
You can print the settings of one or more sensor modes.
The table is now displayed in print mode, i.e. controls (
are displayed at the bottom.
1. Press a row to select it.
2. Press the Print button.
How you now continue depends on whether the printer is connected directly to the measuring
device or if you are working on an external PC.
3. Press Close. The printing of the values is complete.
Export
The table is exported to a csv file and stored on the connected USB stick.
1. Press Edit to change the file name.
O Note: If you are using the program on your PC, the Export dialog appears.
Specify a storage location on the PC and change the name of the export file if necessary.
O Note: Microsoft
properly interpreted for Excel
using the import function.
Read
O Note: You need to be logged on with at least level 4 access rights to use this function.
This function enables the sensor modes of most sensors to be read as long as the sensor in ques-
tion is connected to the device using a data wire.
You use this function if modes are not imported automatically when your devices are started up
or if you want to read in sensor modes again later on.
Communication
MW devices
If you want to control the device via a PC using the TMV, make an entry for the device here
( page 113) and connect the PC to the device.
For a description of the procedure, see page 20.
112
LMA316PA / LMA321PA - Operator Interface - Reference
® ®
Excel 2003: The widespread and universal csv export format cannot be
®
2003. Rename the *.csv file as *.txt and import it into Excel
page 70) for selecting one or more rows
®
2003