Installation And Maintenance; Qualification Of Operating Personnel - Sartorius LMA316PA Betriebsanleitung

WLM6009-a10081
O Note: The specified degree of protection is only guaranteed if the original connectors and sealing
caps are used.
2.4

Installation and Maintenance

DANGER:Risk of death from electric shock!
Before installation and maintenance work or modifications, the instrument must be disconnected
from the power supply.
Connect the device to a properly installed AC outlet whose voltage corresponds to the "Technical
data".
Ensure that the plug is easily accessible, so that, if required, it can be quickly disconnected.
Ensure that the electric cable cannot be damaged by sharp edges or hot objects. The electric
cable must not be bent or crushed.
2.5

Qualification of operating personnel

In order to prevent malfunctions and damage to the measuring system or in production, this
system must only be operated by appropriately qualified, trained personnel. The operator of the
instrument is responsible for ensuring that the appropriate training is provided, for example, for
new personnel. The operating personnel must have read and understood the operating instruc-
tions.
2.6 Warnings
DANGER:Risk of death by electric shock!
The measuring device must not be immersed in, or come into contact with, water or any other
liquids. Do not place receptacles filled with liquid, such as cups of coffee, on the measuring de-
vice. Electric shock hazard!
Remove the plug of the measuring instrument from the mains:
– if you intend to not use the measuring instrument for longer periods of time,
– before cleaning the device,
– before packing away or repositioning the device,
– when working on the measuring device, e.g. attaching peripherals or chang-ing fuses,
– if there is an obvious malfunction during operation,
– in the event of a storm.
Always pull out at the plug, not at the cable.
Caution - material damage
Ensure that there is sufficient distance from sources of heat such as heating plates, heater pipes,
etc.
Do not use aggressive chemical substances, scouring material, hard sponges or similar for
cleaning.
The touch screen surface is very sensitive. You must only touch this with your fingers or specially
designed pens. Do not use pens, screwdrivers or other sharp-edged objects.
Place the LMA316PA / LMA321PA on a stable, level and heat-resistant surface.
The top surface of the LMA316PA / LMA321PA can be used to position a monitor, for example,
for measuring devices that do not have an integrated touchscreen. Max. load: 5 kg.
Do not place any other objects on the LMA316PA / LMA321PA.
8
LMA316PA / LMA321PA - Safety instructions