Sartorius LMA316PA Betriebsanleitung Seite 111

WLM6009-a10081
5. Press Apply to accept the changes.
6. Press Close. The editing of the values is complete.
Delete
O Note: You need to be logged on with at least level 4 access rights to change these settings.
You can delete a sensor mode you created yourself from the list. You cannot delete automatically
loaded sensor modes.
1. Select Delete from the Edit menu.
The table is now displayed in delete mode, i.e. the controls (
rows are displayed at the bottom.
2. Press a row. This selects the sensor mode.
3. Press Delete.
The sensor mode is deleted without a safety prompt.
4. Press Close.
The deletion process is complete.
Copy
O Note: You need to be logged on with at least level 4 access rights to change these settings.
You can copy any sensor mode. A copied mode is pasted into the table with its original name.
Copying a mode allows you to create similar entries very easily.
Select Copy from the Edit menu.
The table is now displayed in copy mode, i.e. the controls (
rows are displayed at the bottom.
1. Press a row. This selects the sensor mode.
2. Press Copy.
Selected rows are copied and inserted into the table as new values.
3. Press Close.
The copy process is complete.
Create
O Note: You need to be logged on with at least level 4 access rights to change these settings.
1. Select New from the Edit menu.
The Sensor mode dialog is displayed.
2. Press Library. Select a sensor mode from the list. The properties of the selected sensor mode
are copied to the dialog box and can now be edited.
3. Press an input field.
The Numerical input (Details on page 125) or Text input (Details on page 124) dialog appears.
Enter the required parameters and specify a name for the new sensor mode.
4. Press Apply.
This creates the sensor mode.
LMA316PA / LMA321PA - Operator Interface - Reference
page 70) for selecting one or more
page 70) for selecting one or more
111