Sartorius LMA316PA Betriebsanleitung Seite 41

WLM6009-a10081
The results of the calibration settings are shown on the right-hand side of the dialog. Press the
List control to display all of the parameters in a list.
Press Display in the dialog for making expert settings. The graph is shown again. You can now
save the calibration or return to the dialog for making expert settings.
Press Auto. The Calibrations tab shows a list of all calibrations which are feasible (with these
parameters).
O Note: If you are using the programme on your PC, click Apply. On a PC, you can move the
individual programme windows to position the graph and input dialog next to each other.
Printing a calibration
If a printer is connected via a USB port or network connection, you can print the graphical depic-
tion or calibration table if required.
Printing a graph
1. Press Calibration > Moisture/Density calibration > Graphics > Print.
The standard print dialog appears - you can specify the print settings and trigger printing by
clicking Print.
Printing a table
1. Press Calibration > Moisture/Density calibration > Table > Print.
2. Select the parts of the table you wish to print. To print the entire table, press All.
3. Press Print.
The standard print dialog appears - you can specify the print settings and trigger printing by
clicking Print.
LMA316PA / LMA321PA - Calibration
41