Sartorius LMA316PA Betriebsanleitung Seite 75

WLM6009-a10081
Edit
Remark
You can enter a remark for selected entries in the table.
Once you press Remark, corresponding controls become available. See Controls in
Measurement/Calibration (Details on page 70).
1. Select an entry, a block, or all entries.
The same remark is defined for all selected entries.
2. To select several rows, press Multi.
Now select several values using the Block 1/Block 2 control or select entries individually.
3. Press Remark.
4. The Text input (Details on page 124) dialog appears.
Enter the text to be displayed and saved with the value.
Existing remarks are overwritten.
5. Press Close to return to the display.
O Note: Press a row in the table to show the input field for entering a remark on the value in
question.
Delete
You can delete selected entries from the table.
Attention:
1. Select an entry, a block, or all entries.
2. To select several rows, press Multi.
Now select several values using the Block 1/Block 2 control or select entries individually.
3. Press Delete.
The selected entries are deleted.
4. Press Close to return to the display.
Copy
You can copy selected entries.
Copied entries are pasted either to the calibration data for a product or the settings for the density
test.
Once you press Copy, corresponding buttons become available. See Controls in
Measurement/Calibration (Details on page 70).
1. Select an entry, a block, or all entries.
2. To select several rows, press Multi.
Now select several values using the Block 1/Block 2 control or select entries individually.
LMA316PA / LMA321PA - Operator Interface - Reference
Deleted readings can no longer be displayed.
Once you press Delete, corresponding controls become available. See Controls
in Measurement/Calibration (Details on page 70).
75