Sartorius LMA316PA Betriebsanleitung Seite 87

WLM6009-a10081
Symbol
3. Press the list field and select a symbol.
In the calibration graph, the calibration point is represented by the selected symbol.
4. Press Apply to accept the setting.
All values
The Calibration properties dialog appears.
Existing information is shown. Press an input field. The Numerical input (Details on page 125)
or Text input (Details on page 124) dialog appears.
If you selected the option for entering the type, the Type (
Press Apply to accept the setting.
Delete
Individual values can be deleted from the calibration.
In the menu, select Calibration > Moisture calibration > Table > Edit > Delete.
The table is now displayed in delete mode, i.e. the controls (
rows are displayed at the bottom.
1. Press a row. The value is selected.
2. Press Delete.
The selected value is deleted. The system continues to take the value into account until the cal-
ibration curve is recalculated.
3. Press Close.
The deletion process is complete.
O Note: Calibration points can be removed from the calibration without being deleted. To do so,
choose Type and set the point's property to Invalid (
account for the calibration.
O Note: If you have a previous calibration that you are satisfied with, you can delete the individual
values to free up memory space. The actual calibration is retained.
Copy
Individual calibration values can be copied.
In the menu, select Calibration > Moisture calibration > Table > Edit > Copy.
The table is now displayed in copy mode, i.e. the controls (
rows are displayed at the bottom.
Copied entries are pasted to the calibration data of a product or to the settings for the density test
as selected.
1. Select an entry, a block, or all entries.
To select several rows, press Multi.
Now select several values using the Block 1/Block 2 control or select entries individually.
2. Press Copy.
3. Select a product from the Copy to dialog.
4. Specify whether the selected values are to be copied to the calibration of the product or the com-
pression test.
LMA316PA / LMA321PA - Operator Interface - Reference
page 86) dialog is displayed.
page 86). This value is not taken into
page 70) for selecting one or more
page 70) for selecting one or more
87