Sartorius LMA316PA Betriebsanleitung Seite 5

WLM6009-a10081
1. Before you begin ...
1.1 Overview of the documentation
This documentation describes the operation of the evaluation device for microwave measuring
devices. The device can be operated with several sensors. Basically, the system may be used in
laboratory operation (LMA321PA and LMA316PA; individual or multiple measurements) as well
as in production (PMD320PA and PMD325PA; online measurement, continuously or bypass).
The user interface of the TMV software is almost identical for the laboratory and online measuring
devices.
This documentation describes the laboratory versions LMA321PA and LMA316PA.
In this documentation various methods in connection with the measurement of moisture and
density are described. The installation of the device and the sensors, as well as, if required, the
connection of further peripheral devices is dependent on the positioning and requirements of the
product to be measured. For this reason, separate documentation is provided for this.
Read this documentation before using the instrument. The documentation must be stored in the
immediate vicinity of the instrument for future reference until the device is disposed of.
1.2 Other manuals
Please also refer to the special documentation supplied with the sensor(s) and the technical man-
ual.
1.3 For technical advice on applications
e-mail: pmd300-support@sartorius.com
Phone (in Germany): +49.(0)551.308.3160
Fax (in Germany): +49.(0)551.308.3495
LMA316PA / LMA321PA
5