Measurement Mode; Calibration Mode - Sartorius LMA316PA Betriebsanleitung

WLM6009-a10081
The cursor position does not necessarily show the current and most recent measurement.
Unlike the cursor position, selected entries have a dark background.
Table/graph/reading

Measurement mode

The display screen shows the results of the measurement. You select the type of display in the
Measurement menu item:
Table
Measured values are shown in a table. You can sort the table by any of its columns. Columns can
be individually sorted or hidden. See section Table (Details on page 74).
Graph
Measured values are shown as a curve. Tendencies or deviations can therefore be easily recog-
nized. In addition, the value range where moisture or density values seem to be critical can be
depicted and an alarm can be generated accordingly. See section Graph (Details on page 77).
Regardless of the selected type of display, the navigation controls help you to find and select
values. See section Navigation (Details on page 72).
Reading
The measured value is displayed in large numbers. The value can be seen clearly even if the user
is not working right next to the device. Navigation is not possible in this case.

Calibration mode

A table of calibration values is displayed on the screen. Values can be entered, added, edited,
and deleted here.
The calibration graph illustrates the calibration curve but allows no direct editing of the values.
Status line
This shows:
– The status of the device or sensor (e.g. "Sensor empty" or "Measuring device stop")
– A prompt (e.g. Please Fill!) if user activity is required
– Error messages (Details on page 128)
– The currently measured value during a measurement run
LMA316PA / LMA321PA - Operator Interface - Reference
67