Sartorius LMA316PA Betriebsanleitung Seite 132

WLM6009-a10081
"Settings" dialog for the graphic display
Measurement > Graphic > Settings
Calibration > Moisture > Graphic > Settings
Direct entry of the offset for moisture
The moisture offset is changed in the product
characteristics dialog (called by choosing
Product Settings >
Edit > Values).
Entering a remark for a measured value
Measurement > Table > Edit >
Remark
Quick access via the field display 1 / 2 in Measurement mode
Calling the "settings" dialog for the display fields
You can also use this dialog to switch between the analog display and the statistics.
Measurement > Display 1 / Display 2
> Analog display > Settings
Measurement > Display 1 / Display 2
> Statistics > Settings
Quick access via the fields Display 1 / 2 in Calibration mode
Calling the dialog "Moisture calibration type/Density calibration type"
Calibration > Moisture/Density >
Type settings > Simple or expert
132
LMA316PA / LMA321PA - Shortcuts
Press one of the labelled axes.
Press the moisture offset display.
In the table of measured values, press one of the fields in the
Remark column.
Press one of the two display panels.
Press the Display 1 field.