Sartorius LMA316PA Betriebsanleitung Seite 113

WLM6009-a10081
Edit
Values
1. Press a row to select it.
2. Press the control to start editing.
The Device properties dialog appears.
3. Enter the IP address as well as further details on the network connection.
4. If working on the PC, click Connect to connect the device and the PC via the IP network.
5. Press Apply to accept the values.
6. Press Close. The editing of the values is complete.
Delete
You can delete a device from the list.
1. Select Delete from the Edit menu.
The table is now displayed in delete mode, i.e. the controls (
rows are displayed at the bottom.
2. Press a row. The device is selected.
3. Press Delete.
The device is removed from the list.
4. Press Close.
The deletion process is complete.
Copy
You can copy the entry for a device. Copied entries are inserted into the table again. Copying an
entry is an easy way to create similar entries.
Select Copy from the Edit menu.
The table is now displayed in copy mode, i.e. the controls (
rows are displayed at the bottom.
1. Press a row. The entry is selected.
2. Press Copy.
Selected rows are copied and inserted into the table as new values.
3. Press Close.
The copy process is complete.
New
1. Select New from the Edit menu.
The Device properties dialog appears.
2. Press an input field.
The Numerical input (Details on page 125) or Text input (Details on page 124) dialog appears.
3. Press Apply.
This creates the entry for a new device.
LMA316PA / LMA321PA - Operator Interface - Reference
page 70) for selecting one or more
page 70) for selecting one or more
113