Change User - Sartorius LMA316PA Betriebsanleitung

WLM6009-a10081
Restoring factory settings
Attention:
The restore process resets the device to a predefined state. All measurements, cali-
brations, and settings for sensor modes or products are lost. If necessary, make a
backup of your current settings first.
If the device is connected to an external PC via a network, you may have to change
the IP address since restoring the factory settings also resets the IP address to the
address set at the factory.
1. Press the upper list box in the Backup dialog. Choose Restore factory settings.
2. Press Apply.
Reset
The program is closed and the user interface is restarted.
Close
If using the program on your computer, select Service > Close to close it.
13.9

Change user

1. Enter your user name and password on the Login screen.
2. Press an input field.
The Text input (Details on page 124) dialog appears.
3. Press Apply.
This logs you into the system. Depending on your access rights, some menu items may be invis-
ible or inactive (greyed out).
13.10 Languages
You select the language for the display here.
1. Press the menu item for the required language.
The language is changed immediately.
13.11 Other dialogs
These dialogs are displayed in various different contexts:
Jump (Details on page 124)
Text input (Details on page 124)
Numerical input (Details on page 125)
Settings for tables (Details on page 126)
LMA316PA / LMA321PA - Operator Interface - Reference
123