Sartorius LMA316PA Betriebsanleitung Seite 78

WLM6009-a10081
5. Press to the left or right of the black bar to move the displayed section (this corresponds to Page
back or Page forward).
Settings
You reach the dialog for making graph settings from the menu or by pressing the value axis.
You define the measured values to be displayed here as well as the way in which they are to be
shown in the graph.
X axis
1. Press the Value list field.
2. Select Time or Pos. (position).
The measured values are displayed in the graph by time or position accordingly.
auto
Press the box to automatically adjust the scale of the X axis. All of the readings in the measure-
ment series are then shown.
If auto is deactivated, select values for the required display format in the Span, Days, and Pause
fields.
1. Press the input field and enter the required value using the Numerical input (Details
on page 125) dialog.
If Time is selected:
Span is the overall time period to be depicted. Enter the time as hh:mm:ss (hours, minutes,
seconds).
O Note: The start and end time points for the depiction are defined by the respective positions of
the cursor. You change these positions using the controls described in Navigation (Details
on page 72) or by pressing in a particular spot on the graph.
Days specifies the number of days to be shown. The value selected in Span and the value
selected here are added together.
Displayed period = Span + Days.
Pause
The device can identify an interruption in the current measuring cycle as a pause. If pauses are
detected, the graphical display is interrupted accordingly.
Enter the required time period between two measurements for a pause to be recognized.
If Pos. is selected:
Span is the number of positions (= measured values) to be depicted.
The smallest possible value is 2.
Y axis
One or two curves can be shown in the graph as desired. You define which measured values are
to be displayed here.
Value
Press one of the two list fields to select the measured values to be displayed.
Choose from the following:
– Moisture
– Density
78
LMA316PA / LMA321PA - Operator Interface - Reference