Electric Seat Height Adjustment - Ottobock Skippi Gebrauchsanweisung

7.2.2 Electric seat height adjustment

WARNING
Risk of falling due to improper use of the seat height
adjustment feature.
„ Drive in street traffic only with the seat height adjust-
ment lowered.
„ Use the seat height adjustment feature only with the
backrest in the upright position.
„ When driving with the seat height adjustment feature
raised, fasten the belts (lap belt, four-point belt) and do
not lean out beyond the seat surface.
„ Ensure that creep speed is activated when the seat
height adjustment function is used. If this is not the
case, contact a specialist dealer immediately. Only use
the power wheelchair with the seat height adjustment in
its lowest position until the fault is repaired.
Skippi
Downloaded from www.Manualslib.com manuals search engine
NOTICE
Damage due to lack of maintenance of the seat height
adjustment feature.
„ Inspect the seat height adjustment feature for visible
signs of damage at least 1 x per month and ensure all
screw connections are tight.
„ Check for correct tyre pressure.
NOTICE
Risk of transportation damage. Always lower the seat
height adjustment feature fully for loading or transportati-
on.
INFORMATION
Please also observe the safety instructions in the section
„Electric Seat Functions" > „Safety Instructions for Use".
INFORMATION
A sufficient supply of power must be maintained in order to
guarantee proper operation of the seat height adjustment
function.
Accessories
Ottobock 155
|