Product Description And Specifications; Intended Use; Product Features - Bosch GCM 350-254 Professional Originalbetriebsanleitung

32 | English
Do not direct the laser beam at persons or
animals and do not stare into the direct or
reflected laser beam yourself. You could
blind somebody, cause accidents or damage
your eyes.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Symbols and their meaning
CLASS 1 LASER PRODUCT
Keep hands away from the cutting area
while the power tool is running. Con-
tact with the saw blade can lead to injur-
ies.
Wear a dust mask.
Wear safety goggles.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Danger area! Keep hands, fingers and
arms away from this area.
The table shows the recommended
speed setting depending on the material
to be worked: Aluminium, plastic, wood.
(Not available in all country-specific ver-
sions)
When sawing bevel angles or mitre
angles > 45°, the adjustable fences must
be pulled outwards or removed com-
pletely.
3 601 M22 6.. Beachten Sie die Abmessungen des
Sägeblatts. Der Lochdurchmesser muss
1 609 92A 5UA | (06.10.2020)
Symbols and their meaning
ohne Spiel zur Werkzeugspindel passen.
Falls eine Verwendung von Reduzier-
305 mm 30 mm
stücken notwendig ist, achten Sie darauf,
3 601 M22 640
dass die Abmessungen des Reduzier-
3 601 M22 6B0 stücks zur Stammblattdicke und zum
Lochdurchmesser des Sägeblatts sowie
zum Durchmesser der Werkzeugspindel
305 mm 25.4 mm
passen. Verwenden Sie möglichst die mit
dem Sägeblatt mitgelieferten Reduzier-
stücke.
Der Sägeblattdurchmesser muss der An-
gabe auf dem Symbol entsprechen.
Shows the rotational direction of the SDS
bolt for tightening the saw blade (anti-
clockwise) and for loosening the saw
blade (clockwise).
Clamping lever closed:
The adjusted bevel angle of the tool arm
is held in place.
Clamping lever open:
Bevel angles can be adjusted.
Direction of rotation of the spacer for the
slide device for sawing wide mouldings.
175 mm
20 mm
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. It is pos-
sible to cut mitre angles of -52° to +60° and bevel angles of
47° (to the left) to 47° (to the right).
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Fence
Bosch Power Tools