Symbols And Their Meaning; Product Description And Specifications - Bosch GCM 8 SJL Professional HEAVY DUTY Originalbetriebsanleitung

26 | English
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
The power tool is delivered with a warning sign (see
u
table: "Symbols and their meaning").
Do not direct the laser beam at persons or
animals and do not look directly into the
laser beam or at its reflection. Doing so
could lead to blindless, or could cause acci-
dents or damage to the eyes.
If laser radiation hits your eye, you must close your
u
eyes and immediately turn your head away from the
beam.
Do not use any optical instruments such as binoculars
u
to view the radiation source. Doing so can damage your
eye.
Do not direct the laser beam at persons who are look-
u
ing through binoculars or similar instruments. Doing
so can damage their eye.
Do not make any modifications to the laser equip-
u
ment. The setting options described in these operating
instructions can be used safely.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.

Symbols and their Meaning

Laser radiation
IEC 60825-1:2014
<0.39mW, 650 nm
LASER RADIATION
Do not view directly with tele-
DO NOT EXPOSE USERS OF
TELESCOPIC OPTICS
CLASS 1M LASER PRODUCT
scopic optical probe
Laser class 1M
Keep hands away from the cut-
ting area while the power tool is
running. Contact with the saw
blade can lead to injuries.
Wear a dust mask.
Wear safety goggles.
1 609 92A 4D3 | (30.08.2018)
Symbols and their Meaning
Wear hearing protection. Expos-
ure to noise can cause hearing loss.
Danger area! Keep hands, fin-
gers or arms away from this area.
The adjustable fence must be
pulled outward when sawing mitre/
bevel angles.
The free end of workpieces must
be supported with saw table exten-
sions.
Take note of the dimensions of the
saw blade. The hole diameter must
fit the tool spindle without play. If it
is necessary to use reducers, en-
sure that the dimensions of the re-
ducer are suitable for the base
blade thickness and the saw blade
hole diameter, as well as the tool
spindle diameter. Wherever pos-
sible, use the reducers provided
with the saw blade.
The saw blade diameter must
match the information specified on
the symbol.
Clamping lever closed:
The adjusted bevel angle of the tool
arm is held in place.
Clamping lever open:
Bevel angles can be adjusted.
Product description and
specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Bosch Power Tools