Symbols And Their Meaning; Product Description And Specifications - Bosch GSM 18V-216 Professional HEAVY DUTY Originalbetriebsanleitug

Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Never make warning signs on the machine unrecognis-
u
able.
The power tool is delivered with a laser warning sign
u
(see table: "Symbols and their meaning").
Do not direct the laser beam at persons or
animals and do not stare into the direct or
reflected laser beam yourself. You could
blind somebody, cause accidents or damage
your eyes.
If laser radiation hits your eye, you must close your
u
eyes and immediately turn your head away from the
beam.
Do not use any optical instruments such as binoculars
u
to view the radiation source. Doing so can damage your
eye.
Do not direct the laser beam at persons who are look-
u
ing through binoculars or similar instruments. Doing
so can damage their eye.
Do not make any modifications to the laser equip-
u
ment. The setting options described in these operating
instructions can be used safely.
Do not use the laser goggles (accessory) as protective
u
goggles. The laser goggles make the laser beam easier to
see; they do not protect you against laser radiation.
Do not use the laser goggles (accessory) as
u
sunglasses or while driving. The laser goggles do not
provide full UV protection and impair your ability to see
colours.
Warning! If operating or adjustment devices other
u
than those specified here are used or other proced-
ures are carried out, this can lead to dangerous expos-
ure to radiation.
Do not replace the integrated laser with a laser of an-
u
other type. A laser that is not compatible with this power
tool could pose a risk to persons.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.

Symbols and their meaning

IEC 60825-1:2014 LASER RADIATION
<0.39mW, 650 nm
LASER RADIATION
DO NOT EXPOSE USERS OF
DO NOT EXPOSE USERS OF TELE-
TELESCOPIC OPTICS
CLASS 1M LASER PRODUCT
SCOPIC OPTICS
CLASS 1M LASER PRODUCT
Bosch Power Tools
Symbols and their meaning
Keep hands away from the cutting area
while the power tool is running. Con-
tact with the saw blade can lead to injur-
ies.
Wear a dust mask.
Wear safety goggles.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Danger area! Keep hands, fingers and
arms away from this area.
The adjustable fence must be pulled out-
wards when sawing bevel angles.
3 601 M41 000 Observe the dimensions of the saw
blade. The hole diameter must match the
3 601 M41 040
tool spindle without play. If it is neces-
sary to use reducers, ensure that the di-
mensions of the reducer are suitable for
the base blade thickness and the saw
3 601 M41 0B0
blade hole diameter, as well as the tool
spindle diameter. Wherever possible, use
the reducers provided with the saw
25,4
blade.
The saw blade diameter must match the
information specified on the symbol.
Shows the rotational direction of the SDS
bolt for tightening the saw blade (anti-
clockwise) and for loosening the saw
blade (clockwise).
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Autogoods "130"
English | 27
1 609 92A 5U3 | (07.10.2020)