Intended Use; Product Description And Specifications; Product Features - Bosch GCM 12 SDE Professional Originalbetriebsanleitung

160992A3UL_201801.book Page 32 Wednesday, January 10, 2018 1:52 PM
32 | English
Symbols and their meaning
3 601 M23 1..
305 mm
3 601 M23 1B.
3 601 M23 14.
305 mm
Observe the dimensions of the saw blade.
The hole diameter must match the tool
spindle without play. If it is necessary to
use reducers, ensure that the dimensions
of the reducer are suitable for the base
blade thickness and the saw blade hole di-
ameter, as well as the tool spindle diame-
ter. Wherever possible, use the reducers
provided with the saw blade.
The saw blade diameter must match the
information specified on the symbol.
Shows the rotation direction of the SDS
bolt for tightening the saw blade (counter-
clockwise) and for loosening the saw
blade (clockwise).
Clamping lever shut:
The set bevel angle of the tool arm is
locked.
Clamping lever open:
Adjusting bevel angles is possible.
175 mm
20 mm
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
1 609 92A 3UL | (10.1.18)

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. In this, hori-
zontal mitre angles from –52° to +60° as well as vertical bevel
30 mm
angles from 47° (leftward) to 47° (rightward) are possible.
The capacity of the power tool is designed for sawing hard-
wood and softwood, as well as particle and fibre board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.

Product Features

25.4 mm
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
Rotation direction of the
spacer for the slide device
for sawing wider mould-
ings.
1 Fence
2 Adjustable fence
3 Stop for standard bevel angles 47°, 45°, 33.9° and
22.5°
4 Scale for bevel angle
5 Right bevel angle indicator
6 Locking screw for slide device
7 Spacer for slide device
8 Clamping lever for any bevel angle
9 Speed regulator(not available for all country-specific
product versions)
10 Transport safety-lock
11 Transport handle
12 Blade guard
13 Handle
14 Lock-off button for On/Off switch
15 Laser protection cap
16 Retracting blade guard
17 Roller
18 Clamping screw for saw-table extension
19 Mounting holes
20 Saw table
21 Insert plate
22 Locking bracket
23 Locking knob for various mitre angles
24 Mitre detent lever
25 Tilt protector
26 Mitre angle indicator
27 Detents for standard mitre angles
28 Scale for mitre angle
29 Saw-table extension
30 Recessed handles
31 Mounting holes for material clamp
32 SDS bolt
33 On/Off switch
34 On/Off switch for laser (cutting line indication)
35 Laser warning label
36 Chip ejector
37 Slide device
Bosch Power Tools