Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electrical dangers
DANGER!
Electrical hazards are marked by the symbol opposite.
Work in these areas may only be carried out by trained personnel with the
appropriate authorisation.
Commissioning steps:
1.
Activate pump (electrical connection / control system).
2.
Check function of the pump.
3.
Check medium carrying components for leak tightness.
Fig. 8: Tighten the pump head screws.
4.
CAUTION!
The four pump head screws (Pos. 1) are then to be tightened using a
torque of 4 Nm!
29
Starting up
417101113 Rev. 9-08.2019
Werbung
