Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installing the device
5.4
Mounting on the wall
5.4.1
Mounting the console
The console (Article No. 207002, EBS Nr. 10003767) is mounted on the wall using
fastening material (see Fig. 4, Pos. 1-3, contained in the scope of supply).
The console is not contained in the scope of supply of the TurboPUMP
(see
Fig. 3: Distance between holes for the wall console (hole diameter: 8 mm)
The console can be extended as required to the right to mount pumps in a row.
The console must be fixed to the neighbouring console by fastening screws (Pos. 4).
Fig. 4: Row mounting the console
A
Upper fastening
B
Lower fastening
1
Fastening screw
417101113 Rev. 9-08.2019
Ä Chapter 3 'Scope of supply' on page 20).
2
Washer
3
Dowel
4
EJOT-PT screw
24
Werbung
