ECOLAB ULTRAX Cube Betriebsanleitung Seite 253

ð The quantity/time unit of the product that has been drawn off provides the basis
for calculating the metering time for the respective product.
7.
In manual mode, activate the solenoid valve for flushing with water
exits the sample collection port without bubbles.
8. Perform the calibration procedure successively for all configured metering products.
9. Dispose of the removed fluids properly.
10. Set the rotary handle on the sampling tap
ð Calibration is complete.
to the vertical position.
1
57
Start-up
until water
4
MAN053089 Rev. 1-11.2023