Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.9
General workplace dangers
Risk of slipping
DANGER!
Slipping hazards are marked by the symbol opposite.
Spilled chemicals create a risk of slipping when wet.
WARNING!
Risk of slipping due to fluid in the operation and provisioning area!
– Wear non-slip, chemically resistant shoes when working.
– Place product containers in a tank to prevent a slipping hazard caused
by leaking fluids.
ENVIRONMENT!
Immediately soak up any leaking liquids with a suitable binding agent and
dispose of properly.
DANGER!
Dangers due to electrical current are indicated by the symbol opposite.
Work on those places may only be carried out by skilled personnel who are
duly trained and authorised.
WARNING!
The protective earth connection is marked by this symbol at the connection
points.
DANGER!
Risk of fatal injury from electric current!
Contact with live, current-conducting components presents imminent, life-
threatening hazard. Damage to the insulation or individual components can
be life-threatening.
– Work on electrical components may only be carried out by professional
electricians.
– Before starting work, isolate the system from the power supply and
ensure this state is maintained for the duration of the work.
– Turn off immediately and organise repairs if there is any damage to the
insulation voltage supply.
– Never bridge or decommission fuses.
– When replacing fuses, comply with the rating.
– Keep voltage-carrying parts away from moisture, as this can cause a
short circuit.
19
Safety
417102208 Rev. 8-11.2019
Werbung
