Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.4
Service life
If maintenance is conducted properly (visual inspection, functional testing, replacement of
parts, etc.), the life span of the station is approximately 10 years.
Afterwards, a revision or a general overhaul may need to be done the manufacturer.
Ä
'Manufacturer' on page 15
2.5
Safety measures taken by the operator
NOTICE!
It is expressly up to the operator to train, monitor and instruct its operating and
maintenance personnel so that they comply with all of the necessary safety
measures.
The frequency of inspections and controls must be complied with and
documented.
WARNING!
Danger due to improperly installed system components
Improperly installed system components can result in personal injury and
damage to the system.
– Check that the system components provided (pipe joints, flanges) have
been installed correctly.
– If assembly has not been performed by Customer Service or another
authorised party, check that all system components are made of the correct
materials and meet the requirements.
Obligations of the operator
Valid guidelines
In the EEA (European Economic Area), national implementation of the
Directive (89/391/EEC) and corresponding individual directives, in particular
the Directive (2009/104/EC) concerning the minimum safety and health
requirements for the use of work equipment by workers at work, as amended,
are to be observed and adhered to. If you are outside the EEA, the local
regulations always apply. However, it is important to make sure that the EEA
rules do not apply to your area, due to special agreements. The operator is
responsible for checking the terms and conditions that affect you.
The operator must adhere to the local legal provisions for:
The safety of personnel (within the Federal Republic of Germany, in particular
n
the federal law and accident prevention regulations, workplace guidelines, e.g.
operating instructions, also according to Section 20 Hazardous Substances Ordinance
(GefStoffV), personal protective equipment (PPE), preventive investigations)
n
The safety of work materials and tools (protective equipment, work instructions,
procedural risks and maintenance)
n
Product procurement (safety datasheets, list of hazardous substances)
n
Disposal of products (Waste Act)
n
Disposal of materials (decommissioning, Waste Act)
19
Safety
MAN053089 Rev. 1-11.2023
Werbung
