Function Description; Actuation - ECOLAB ULTRAX Cube Betriebsanleitung

4

Function Description

The dosing pump series TurboPUMP is a range of electric motor-driven membrane dosing
pumps mounted in a free discharge point, suitable for use with uncontaminated,
non-abrasive dosing media.
An asynchronous motor acts as a drive which has an integrated fan for better cooling.
An additionally installed thermal protection switch switches the pump off in the case of
overheating and switches it back on again after a certain cooling phase.
A built-in spring actuator ensures a low noise level and extends the working life of the
pump.
4.1

Actuation

Die TurboPUMP wird über die Spannungsversorgung des Netzkabels gesteuert.
CAUTION!
This pump does not have an On/Off button and starts immediately the
mains supply voltage is applied!
Ensure that you make sure that all hose connections are fully mounted so
that no dosing agent can escape in an uncontrolled manner and injuries
caused.
Always observe legal regulations and the corresponding product datasheet
when using dangerous or aggressive chemicals.
21
Function Description
417101113 Rev. 9-08.2019