Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly and connection
5.4.3
Connecting the machine cables
Use EVA PVC fabric hose 10x3mm on the "2/2-way solenoid valve distributor
block - machine side".
1.
Loosen the clamping screws of the corresponding strain relief screw fittings
2.
Route the hoses to the washer extractors through the strain relief screw fittings.
3.
Connect the hoses to the corresponding hose nipples
supplied.
4.
Tighten the clamp bolts of the strain relief screw fittings.
The following machine assignments apply:
Fig. 10: 2/2-way solenoid valve distributor block - machine
side
MAN053089 Rev. 1-11.2023
1
2
3
4
5
A
B
C
B
Strain relief screw fitting
A
Hose nipple
B
2/2-way solenoid valve
C
Machine assignment (machine 1)
1
44
.
A
using the hose clamps
Werbung
