TR-Electronic AD 582 Serie Gesamt-Bedienungsanleitung Seite 319

Safety Program Creation - Configuration Example

In order to save the measuring system input data in the Main_Safety_RTG1
(FB1) block, you must select the block in the Project tree by double-
clicking with the left mouse button. The block opens in the program editor in the
work area.

A MOVE box is inserted in Network 2 from the instructions on the right-hand
side. The MOVE box can be found under Basic instructions in the Move
operationsfolder. For
connected
ˮIN_DataEncSafetyˮ.Safety_Multi from the fail-safe data block
connected.
For "Position-Singleturn" and for "Speed" this process is repeated with the
relevant input and output tags.
 TR-Electronic GmbH 2016, All Rights Reserved
Page 122 of 159
"Position-Multiturn" the tag
IN
at the input
TR-ECE-TI-DGB-0292 v02
IN_Multi_Safety
OUT1
and at the
is
output the tag
is
Printed in the Federal Republic of Germany
08/06/2021