Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
UK Type-Examination Certificate
For UK Regulations SI 2008 No. 1597
The Supply of Machinery Regulations 2008
Reg.-No.: 01/205U/5518.00/22
Product tested
Type designation
Codes and standards
Intended application
Specific requirements
This product is in conformity with all requirements of SCHEDULE 2, PART 1 (Annex I) of SI 2008 No. 1597.
This Type-Examination certificate refers to an evaluation of the above mentioned product as stipulated in SCHEDULE 2, PART 9
(Annex IX) of SI 2008 No. 1597.
Valid until 2026-08-20
The issue of this certificate is based upon an examination, whose results are documented in
Report No. 968/FSP 1053.04/22 dated 2022-09-29.
This certificate is valid only for products which are identical with the product tested.
Köln, 2022-10-11
www.fs-products.com
Multi-Turn Rotary Encoders with various
fieldbus interfaces
ADS..., ADV...,CDH...,CDS...,CDV...
details see attached Revision List
EN 61800-5-2:2007
EN 61800-5-2:2017
EN 62061:2005 + AC:2010 + A1:2013 +
A2:2015
The devices comply with the requirements of the relevant standards (Cat. 4 / PL e acc. to
EN ISO 13849-1, SILCL 3 / SIL 3 acc. to EN 62061 / EN 61508, EN 61800-5-2) and can be
used in applications up to PL e acc. to EN ISO 13849-1 and SIL 3 acc. to EN 62061 /
EN 61508 and in the application area of EN 60204-1:2018.
The instructions of the associated Installation and Operating Manual shall be considered.
TUV Rheinland UK Ltd.
Approved Body for Machinery, No. 2571
Certificate
TR Electronic GmbH
holder
Eglishalde 6
78647 Trossingen
Germany
EN ISO 13849-1:2015
EN 61508 Parts 1-7:2010
Dipl.-Ing. Gebhard Bouwer
TR-ECE-TI-DGB-0395 v00
Werbung
Inhaltsverzeichnis
