In order to save the safety input data of the measuring system in the safety
program in the example project, a fail-safe data block must be created.
To do this, go to Project tree and in the directory tree select the entry
CD_75_-EPN_PROFIsafe -> PLC_1 [CPU 1511F-1 PN] -> Program
blocks -> Add new block by double-clicking with the left mouse button.
This opens a window, where you can add the blocks.
Printed in the Federal Republic of Germany
08/06/2021
TR-ECE-TI-DGB-0292 v02
TR-Electronic GmbH 2016, All Rights Reserved
Page 115 of 159