Herunterladen Inhalt Inhalt Diese Seite drucken

Parameter Definition / Crc Calculation; Crc Calculation Via Iparameters - TR-Electronic AD 582 Serie Gesamt-Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Parameter definition / CRC calculation

3.1.1 CRC calculation via iParameters

The preset standard values are used for the following example of a CRC calculation.
These can be loaded in the TR_iParameter program using an XML template file. If
different values are required, the standard values can be overwritten by double-
clicking on the relevant entry. The modified parameters can be saved as a complete
parameter set or opened again as a template.
Start TR_iParameter by means of the start file "TR_iParameter.exe", then via
the menu File -> Open XML template... open the template file supplied
with the measuring system (in this example: CDx75M_EPN_002.xml).
 TR-Electronic GmbH 2016, All Rights Reserved
Page 90 of 159
TR-ECE-TI-DGB-0292 v02
Printed in the Federal Republic of Germany
08/06/2021

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ad 75 serieAdv582Adv75

Inhaltsverzeichnis