Siemens SINUMERIK 840Di sl Inbetriebnahmehandbuch Seite 480

Inbetriebnahme HMI-Advanced (IM4)
2 Funktionen und Parameter einstellen
Auch die Mehrdateien-Strategie kann über den Eintrag DiskCare in der Ini-Datei an-
gewählt werden.
[KEYS]
Cancel=Escape
[Helpcontext]
File0=hlp\alarm_ .pdf
[MmcAlarmDisable]
DisableSenderOfMmcAlarm0=mbdde
DisableSenderOfMmcAlarm1=NCU
DisableSenderOfMmcAlarm2=PLC
DisableSenderOfMmcAlarm3=
DisableSenderOfMmcAlarm4=
DisableSenderOfMmcAlarm5=
DisableSenderOfMmcAlarm6=
DisableSenderOfMmcAlarm7=
DisableSenderOfMmcAlarm8=
IM4/2-98
; information about the keys that may be used to clear an alarm
; A function-key (e.g. ESCAPE) is assigned the cancel function.
; This makes it possible to acknowledge cancel-alarms on the
; PC development system, too. ----------------------------------------------------
; This section specifies the names and paths of the help files that
; contain help texts in the WinHelp format.
; This list includes a maximum of 10 entries.
; The filename fragments must not exceed 6 chars, because it is
; extended automatically by the message module according to the
; selected language. A filename extension may be appended optionally.
; For additional information see SINUMERIK 840D OEM package
; HMI User's Manual.
Für OEM-Anwender:
; reserve some sender names of HMI alarms. The names mbdde,
; NCU and PLC are reserved for mbdde internal purposes.
SINUMERIK 840D sl/840Di sl/840D/810D IBN HMI (IAM) - Ausgabe 01/2006
© Siemens AG 2006 All Rights Reserved
01/2006