Siemens SINUMERIK 840Di sl Inbetriebnahmehandbuch Seite 475

01/2006
JOG_PRESET=7 ; Preset or Set actual value at mode JOG mode
JOG_HAND=7
JOG_ANKRATZ=7
JOG_INCREM=7 ; Set increment at mode JOG
JOG_SYNAKT=7 ; Synchron actions at mode JOG
JOG_V_ISTW=7
JOG_V_ZOOM=7 ; Zoom actual values at mode JOG
JOG_INCHMET=7
REF_SISITEC=4
MDI_PROGBE=7 ; Program control at MDI mode
MDI_HAND=7
MDI_EDITOR=7
MDI_ED_DAT=7
MDI_ED_CLR=7
MDI_V_ISTW=7
MDI_V_ZOOM=7 ; Zoom actual values at MDI mode
MDI_SYNAKT=7
MDI_DATEI=4
MDI_INCHMET=7 ; Switch inch/Metric at MDI mode
AUTO_OVERST=7
AUTO_DRF=7
AUTO_PROGBE=7
AUTO_SASUCH=7
AUTO_HAND=7
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl/840Di sl/840D/810D IBN HMI (IAM) - Ausgabe 01/2006
==>5 Suggestion machine setter
; Handweel at mode JOG
==>6 Suggestion operator
; Scratch
==>6 Suggestion operator
==>6 Suggestion operator
==>5 Suggestion machine setter
; watch windows of Actual-values,
==>7 Suggestion everyone
; Spindels, G-Functions, Aux.-Functions,
; Feedrate, Tools or Axis-feedrate at mode JOG
==>7 Suggestion everyone
; Switch inch/Metric at mode JOG
==>6 Suggestion operator
; Commit safety integrated Ref.Point
==>4 Schluessel 3 um kompatibel zu bleiben
==>6 Suggestion operator
; Handweel at MDI mode
==>6 Suggestion operator
; Edit program at MDI mode
==>5 Suggestion machine setter
; Editor funtions at MDI mode
==>5 Suggestion machine setter
; Clear buffer at MDI mode
==>5 Suggestion machine setter
; watch windows of Actual-values,
==>7 Suggestion everyone
; Spindels, G-Functions, Aux.-Functions,
; Feedrate, Tools or Axis-feedrate at MDI mode
==>7 Suggestion everyone
; synchron actions at MDI mode
==>5 Suggestion machine setter
; File funtions at MDI mode
==>6 Suggestion operator
; Overstore at AUTO mode
==>5 Suggestion machine setter
; DRF at AUTO mode
==>6 Suggestion operator
; Program control at AUTO mode
==>6 Suggestion operator
; Blocksearch at AUTO mode
==>6 Suggestion operator
; Handweel at AUTO mode
==>6 Suggestion operator
Inbetriebnahme HMI-Advanced (IM4)
2 Funktionen und Parameter einstellen
IM4/2-93