RK Rose+Krieger MultiControl II duo Montageanleitung Seite 223

Rating plate
Fig. 138: Rating plate
Configuration label
Fig. 139: Configuration label
FCC/MET label
Fig. 140: FCC/MET label
20.08.2021
The rating plate (Fig. 138) is located on the control unit housing
Ä Page 137).
(
1 Type designation
2 Serial number
3 Technical data
4 "Attention! Danger!" symbol
5 "Do not dispose of with household waste!" symbol
6 CE marking
7 "Only use in closed rooms!" symbol
8 "Observe the instructions!" symbol
9 Year of manufacture
The configuration label(Fig. 139) is located on the control housing
Ä Page 137).
(
1 Article number
2 Configuration (Basic/Premium)
3 Drive type (in this case: Multilift II)
4 Hardware version/software version
5 Order number
The FCC/MET label (Fig. 140) is located on the control unit
housing (
1 MET marking
2 FCC marking
The MET marking (Fig. 140/1) for product safety is recognised on
the USA and Canadian markets, and shows that electrical and
electronic devices have been tested and certified for safe use in
the workplace.
The FCC marking (Fig. 140/2) is required for the approval of any
type of communication devices for the USA market. The FCC
marking confirms the electromagnetic compatibility of electronic
products.
Control unit RK MultiControl II duo/RK MultiControl II quadro
Ä Page 222
The hardware version and software version can
also be displayed using the "Info" menu
212.
Ä Page 137).
Technical data
Ä Page
223