2.6 Staff requirements
Insufficient qualification
Authorised staff
Staff qualifications
20.08.2021
In case of modifications or conversions which have not been
expressly approved by the party responsible for conformity, the
user loses the authorisation to operate the device.
The different tasks described in this manual require the persons to
whom the tasks were assigned to have different qualifications.
Only persons who can be expected to reliably complete the tasks
are approved for all work. Persons whose reactions are impaired
due to drugs, alcohol or medication, for example, are not approved.
In this manual, the following staff qualifications are listed for the dif-
ferent tasks:
Assembly staff
Assembly staff are the persons designated by the operator to carry
out installation and assembly, maintenance and troubleshooting for
the control unit. The operator must ensure that the staff deployed
are qualified to carry out the assembly and installation work.
Based on their professional training, knowledge and experience, as
well as their knowledge of the relevant regulations, the assembly
staff must be capable of carrying out work assigned to them and of
independently identifying and avoiding potential hazards.
Assembly staff are specifically trained for the area of responsibility
in which they work and are familiar with the relevant standards and
regulations.
Qualified electrician
Based on their professional training, knowledge and experience, as
well as their knowledge of the relevant standards and regulations,
the qualified electrician must be capable of carrying out work on
electrical systems and of independently identifying and avoiding
hazards.
Control unit RK MultiControl II duo/RK MultiControl II quadro
WARNING!
Danger in the event of insufficiently qualified
persons!
Insufficiently qualified persons are unable to
assess the risks associated with handling the con-
trol unit and thus put themselves and others at risk
of severe or fatal injury.
– Only have suitably qualified persons carry out
all work.
– Insufficiently qualified persons must be kept
away from the work area.
Safety
Staff requirements
133