Lighting Time" Menu - RK Rose+Krieger MultiControl II duo Montageanleitung

Operating the hand switch with 6 function buttons
Hand switch menu > Lighting time menu
Setting the brightness
Fig. 57: Setting the brightness

7.4.4 "Lighting time" menu

Selecting a menu
Fig. 58: Selecting a menu
Setting the lighting time
Fig. 59: Setting the lighting time
178
2.
Prerequisite:
The main menu for the hand switch is displayed
n
1.
2.
Control unit RK MultiControl II duo/RK MultiControl II quadro
The brightness of the display screen is set to
50% in the factory. The brightness can be
changed in 2% steps.
Set the new brightness value (Fig. 57).
ð The brightness has been set.
Select the menu via "Hand switch" ® "Lighting time"
(Fig. 58).
The lighting time for the display screen is set
to 10 s in the factory.
The following lighting times can be set: 0 s;
10 s; 20 s; 30 s;
If 0 s is set, the display screen is not illumi-
nated. Select
Set the new lighting time (Fig. 59).
ð The lighting time has been set.
Ä Page 169.
∞ s.
∞ s for continuous illumination.
20.08.2021