Assembly; Safety Information For Assembly; Conditions At The Installation Site - RK Rose+Krieger MultiControl II duo Montageanleitung

5

Assembly

5.1 Safety information for assembly

Improper assembly

5.2 Conditions at the installation site

20.08.2021
The following conditions must be met at the installation site for the
control unit:
n Sufficient lighting is available.
n The installation site is clean and dry, and free from dust and
objects.
n The atmosphere must be free from solvents.
n All of the connections required on site are available.
Room temperature: +5 - +40 °C
n
Relative humidity: 30 - 75%
n
Air pressure: 700 hPa - 1600 hPa
n
n Temperatures below the dew point are not permitted.
Control unit RK MultiControl II duo/RK MultiControl II quadro
WARNING!
Risk of injury due to improper assembly!
Improper installation and assembly can lead to
severe injuries and substantial material damage.
– Before starting work, pull the mains plug and
ensure that there is sufficient space for

assembly.

– Handle exposed components with sharp edges
carefully.
– Ensure that the assembly site is kept clean and
tidy at all times! Components and tools lying
around or on top of one another are sources of
accidents.
– Assemble components properly. Adhere to the
required screw tightening torques.
Assembly
Conditions at the installation site
149