Intended Use - RK Rose+Krieger MultiControl II duo Montageanleitung

Safety

Intended use

Tips and recommendations
Further indications
2.2 Intended use
Use
128
Warning signs
The following indications are used in this manual to highlight
instructions, results, lists, references and other elements:
Indication
The MultiControl duo and quadro control units are used exclu-
sively for positioning moving parts of furniture (e.g. the drives of
height-adjustable table frames) and other comparable positioning
tasks in closed rooms, using an electric motor.
The control units must only be used if they are connected to com-
patible drives
Take into account information provided in catalogues, the content
of these instructions and the conditions defined in the order.
Control unit RK MultiControl II duo/RK MultiControl II quadro
This symbol highlights useful tips and recommen-
dations as well as information for efficient and
faultless operation.
Explanation
Step-by-step instructions
ð Results of individual steps
References to sections of this manual and
other applicable documents
Lists without a defined order
-
Lists in notes without a defined order
[Buttons] Operating controls (e.g. hand switch but-
tons)
"Display" Display texts
Ä Page 141.
Type of danger
Warning – hand injuries.
Warning – high-voltage.
Warning – danger zone.
20.08.2021